Used IFR Aeroflex IFR2390A Microwave Spectrum Analyzer 9Khz To 22Ghz

Description

The IFR Systems (Aeroflex) 2390A spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of “super-heterodyne receiver” to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the IFR Systems (Aeroflex) 2390A. The CRT displays received signal strength (y-axis) against frequency ( x-axis).

Some applications for IFR Systems (Aeroflex) 2390A Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a IFR Systems (Aeroflex) 2390A spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the IFR Systems (Aeroflex) 2390A spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.

FEATURES

– Fully synthesized Spectrum Analyzers to 26.5 GHz

– 3 Hz to 30 MHz resolution bandwidth filters

– Excellent intermodulation performance

– +30 to -135 dBm measurement range

– Measurements to 300 GHz with exteal mixers

– Optional built-in tracking generator

– Receiver mode with AM and FM demodulators

– Optional quasi-peak detector and EMC filters

The 2390A series of spectrum analyzers from IFR combine exceptional performance with excellent value for money. There are three instruments in the range:

2392A 9 kHz to 2.9 GHz

2390A 9 kHz to 22 GHz

2393A 9 kHz to 26.5 GHz