Phone Call Icon

Call Us

+62 8882886888

My Account Icon

New Rohde & Schwarz FSUP26 20 Hz – 26.5 GHz Signal Source Analyzer

$39.900

The Rohde & Schwarz FSUP26 Signal Source Analyzer combines the functionality of a high performance spectrum and signal analyzer with the advantages of a phase noise test system, all in a single box. The R&S FSUP26 is a unique and simple-to-use one-box solution for measuring oscillators and synthesizers in development and production applications. In addition, the Rohde & Schwarz…

5 in stock

SKU: XRF0752
Category:

Description

The Rohde & Schwarz FSUP26 Signal Source Analyzer combines the functionality of a high performance spectrum and signal analyzer with the advantages of a phase noise test system, all in a single box. The R&S FSUP26 is a unique and simple-to-use one-box solution for measuring oscillators and synthesizers in development and production applications. In addition, the Rohde & Schwarz FSUP26 leads to enormous cost reductions.

The R&S FSUP26 analyzer is perfect for not only mode communications and broadcast systems, but also radar applications. Use the FSUP26 to measure phase noise and when characterizing oscillators, measure tuning slope, transient response, power, harmonics and spurious emissions, as well as amplifier noise. The integrated DC sources enable a wide range of additional measurements.

Included Options:

  • B4 – OCXO, low aging/improved phase noise at 10 Hz carrier offset
  • B18 – Removable Hard Disk
  • B23 – 20 dB Preamplifier, 3.6 GHz to 26.5 GHz
  • B25 – 20 dB Preamplifier, 3.6 GHz to 26.5 GHz
  • B60 – Low Phase Noise Board, necessary for Cross-correlation

Features :

  • Frequency range up to 26.5 GHz (up to 110 GHz with exteal mixers)
  • Low Noise DC outputs for supply and tuning voltages
  • Maximum flexibility for phase noise measurements
  • Oscillator characterization
  • Analysis of digital and analog modulated signals

Capabilities :

  • Phase detector method with inteal/exteal reference
  • Two-DUT method
  • High sensitivity
  • Automatic setting of all important parameters
  • Easy operation
  • Detection, suppression and listing of interference
  • Measurement of reference points as a function of frequency
  • Measurement of residual phase noise
  • AM noise

Abbreviated specifications :

  • Operating Modes:
    • Signal Source Analyzer: 1 MHz – 26.5 GHz
    • Spectrum Analyzer: 20 Hz – 26.5 GHz
  • Signal Source Analyzer
    • Phase Noise Measurement:
      • w/ Spectrum Analyzer: 10 MHz – 26.5 GHz
      • w/ Phase Comparator: 1 MHz – 26.5 GHz
        • inteal reference: 1 MHz – 26.5 GHz
        • exteal reference: 1 MHz – 8 GHz
      • w/ Phase Comparator & Cross-Correlation: 1 MHz – 26 GHz
  • Transient Measurement:
    • min. frequency offset: 10 MHz
    • max. frequency offset: 30 MHz
  • Residual Noise w/ Phase Comparator: 1 MHz – 8 GHz
  • AM Noise: 1 MHz – 8 GHz
  • Sensitivity with inteal reference and inteal phase detector:
    • Input level >+10 dBm, spurious and harmonics <–30 dBc, mode “averaged”, +20 °C to +30 °C. LNA gain 40 dB, loop bandwidth =10 × frequency offset, max. 1 kHz. With the R&S Option B60 low phase noise Option B61 correlation extension option.

        Additional information

        Weight 5 kg

        Reviews

        There are no reviews yet.

        Be the first to review “New Rohde & Schwarz FSUP26 20 Hz – 26.5 GHz Signal Source Analyzer”

        Your email address will not be published. Required fields are marked *